Horizontal Pressure Steam Sterilizer（Microcomputer control）

Parameters

Product description
Technical Data

Use

The horizontal autoclave, which adopte the way of gravity exchange to release the cold air from the chamber more completely toensure the reliable sterilization. The control system automatically adjust the steam inlet and outlet according to chambertemperature during sterilizing. This unit is an ideal equipment for clinics, scientific research institutes and other organizations tosterilize surgical instruments, fabric glassed, and the culture media etc.

Characteristics

• Automatially controlled the sterilizing process, easy to operate.

• With drying function, suitable for the medical dressing drying.

• With overtemperature, overpressure autoprotect.

• The door can not be open until the pressure in the chamber is reduced to 0.027MPa. And the unit can not be started on if the Idoor doesn't close well.

• The safety valve will be open automatically when the inner pressure over 0.24MPa and the steam would be exhausted the water tank.

• Automatically cut off the power if the waterlack happened, and alarm at the meanwhile.

• The chamber of the sterilizer is made of stainless steel.

• With printer.

MODEL	WS-150YDB	WS-200YDB	WS-280YDB
Technical Data	WS-150YDB	WS-200YDB	WS-280YDB
Stenilizing chamber volume	150L	200L	280L
Stenilizing chamber volume	φ440×1000	φ515×1000	φ600×1000
Working pressure	0.22Mpa
Working temperature	134℃
Temperature adjust range	40℃-134℃
Time for sterilization	0-99min
Time for drying	0-99min
Heat average	≤±2℃
Power	9kw/380V 50Hz	9kw/380V 50Hz	12kw/380V 50Hz
Dimension（mm）	1400×650×1600	1400×750×1700	1520×910×1900
Exerior package dimension（mm）	1560×820×1820	1560×910×1880	1680×1080×2100
G.W/N.W	430/340kg	436/350kg	570/462Kg