MOULD INCUBATOR（BMJ-100/160/250）

The shell is made of cold-rolling steel with static spray plastics, the working chamber is made of mirror stainless steel, the shelves can be adjusted optionally;
PMMA II operating system, precise temperature control and stable performance, over temperature alarm and self-diagnosis function;
Backlight touch button setting, with temperature and time adjustment control, easy to observe and operate;
Color LCD backlight display, accurate and intuitive display, superior performance;
With screen lock time, screen saver password setting function, to prevent operation at will;
Programmable design, it can be set 30 segments 99 cycles;
Through the air duct design Centrifugal fan makes the cold air combined with the hot air well then blown into the working chamber, it ensures the precise temperature and a better uniformity;
Observation glass inner door;
Test holes are equipped on both sides, internal diameter is 30mm;
The fan has 6-stage speed regulation, which can meet the requirements of different wind speeds and avoid sample volatilization due to excessive air volume;
With reservation and timing function;
Equipped with mechanical lock, prevents from opening at will;
Equipped with 220V power socket;
Equipped with UV light in working chamber;
Adopt imported noise reduction compressor unit, low noise, stable performance;
Power supply recovery function, data will not be lost when power failure and system halted.