MQDS-B3cell Large-Capacity Stackable CO2 Shaking Incubator

1.The imported infrared CO2 sensor is used to automatically control the CO2 concentration, with a sensitive response and high precision. It is equipped with a set of controller and solenoid valve, and the user only needs the CO2 gas source to use it directly;
2.Each layer of the machine is equipped with two carbon dioxide controls the valve, one fast charging valve and one slow flushing valve, can quickly and stably control the concentration of carbon dioxide and prolong the use time of carbon dioxide;
3.With a CO2 intake filter device, it can effectively remove particulate impurities and microorganisms and other pollution sources in the incoming CO2 gas

Parameters

1. Three layer superposition combination, small floor area; Each layer can independently control temperature and speed as required

★ 2. The shake plate can be drawn out freely to facilitate the loading and unloading of the shake bottle; Waterproof design, the interior of the box can be directly flushed with water, and the water can be diverted by itself to facilitate cleaning and prevent bacterial cross infection (patent certificate or patent number is required)

★ 3. The PLC control system is more accurate in temperature control, and can add any program at any time to meet user needs more humanely

★ 4. The precision three air duct design ensures that there is no temperature dead angle in the whole box and the uniformity of the whole box (patent certificate or patent number is required)

★ 5. The rocker is made of aluminum plate with ultra-high bearing capacity, which is easier to use in the process of drawing

6. Servo motor is used for accurate control speed, good high-speed performance and strong stability

★ 7. The humanized design has two functions: slow stop when opening the lid and stop when opening the lid. It is safer and more convenient to use, reduces the shear force on cells, and has stronger stability

★ 8. The swing plate locking mode of portable positive opening and anti locking is adopted, and the swing plate can be quickly fixed or unlocked within 5 seconds

9. The hollow tempered glass door is convenient to observe the internal conditions of the box from all angles without opening the door at any time; Door heating and glass heating can effectively prevent condensation water

10. High quality imported compressors and fluorine free environmental friendly refrigerants are adopted, with low noise and good refrigeration effect to ensure long-term stable operation of the equipment under low temperature

★ 11. The self balancing system design can effectively improve the stability of the machine body and prolong the service life of the machine (patented)

★ 12. The touch screen can view the temperature and speed curves during the experiment, which is convenient for observing the impact of temperature and speed on the experiment. It can also realize the time accumulation function and timing function, and the data can be stored for one year

13. The imported infrared CO2 sensor is used to automatically control the CO2 concentration, which is sensitive and accurate. It is equipped with a set of controller and solenoid valve. Users only need to connect the CO2 gas source to use it directly

★ 14. Three level or more management authority can be set freely. Each authority has an independent user name and password to log in, set security authority, modify parameters and use screen data, which is convenient for management

15. Oscillation frequency 10-300rpm

16. Temperature control range: 4-60 ℃

17. Temperature regulation accuracy ± 0.1 ℃

★ 18. Temperature uniformity ± 0.5 ℃

★ 19. Maximum capacity of single layer: 250ml × 66 or 500ml × 45 or 1000ml × 28 or 2000ml × 15 or 3000mlX14 (three layers in total)

20. CO2 controller: infrared

21. CO2 concentration control range: 0-20%

22. CO2 concentration control accuracy: 0.1% (at5%)

23. Optional active high-temperature sterile humidifying humidity control: ambient humidity - 95%. The active built-in humidifier does not take up space, and the external make-up bucket realizes automatic water replenishment

24. The box has UV sterilization timing function

1. The imported infrared CO2 sensor is used to automatically control the CO2 concentration, with sensitive response and high precision. It is equipped with a set of controller and solenoid valve, and the user only needs the CO2 gas source to use it directly.

2. Each floor of the machine is equipped with two carbon dioxide control valves, one fast-charging valve and one slow-flushing valve, which can quickly and stably control the concentration of carbon dioxide and prolong the use time of carbon dioxide.

3. With CO2 intake filter device, it can effectively remove particulate impurities and microorganisms and other pollution sources in the incoming CO2 gas

4. LCD touch screen, setting CO2 concentration, temperature, speed, time, actual CO2 concentration, temperature, speed and remaining time are displayed on the same interface, no need to switch interfaces, observation is more intuitive, touch screen can display time accumulation function and timing function in real time; Freely set forced convection fan normally on, automatic or off

5. With the data memory function, it can record the temperature and speed data per minute in real time, and form historical data and real-time curve graphs, which is convenient to observe and analyze the influence of temperature and speed on the experiment during the experiment. The data can be stored for 12 months. USB interface, easy to import and export information

6. Using PLC microcomputer intelligent control, any program can be added at any time, more user-friendly to meet user requirements, and the programming operation can be upgraded

7. The unique and precise three-channel gas cooling and heating mixing circulation air duct design ensures the temperature uniformity of the entire box (patent number: ZL 2015 2 1053453.7)

8. Adopt self-balancing system design, which can effectively improve the stability of the body and prolong the service life of the machine

9. Built-in diversion waterproof system, the inner cavity of the machine can realize waterproof flushing without dead angle, and it is easy to clean without special tools (patent number: ZL 2020 2 2152299.6)

10. Built-in humidity plate, using high-precision humidity probe, the humidity in the chamber can reach 95% under normal culture at 37, and the humidity can be displayed in real time

11. Using a quick fixing device, the rocking plate can be quickly fixed or unlocked within 5 seconds; the built-in aluminum rocking plate is beautiful and light, and can be pulled with one hand, saving time and effort, greatly improving work efficiency

12. The humanized design of the cap-opening stop or the cap-opening slow stop function is safer and more convenient to use, reduces the shear force on cells, and has stronger stability

13. It is specially equipped with an external ambient temperature probe, and the ambient temperature is displayed on the panel in real time, which is convenient for precise control of the temperature inside the box

14. Optional: upgradeable wireless WIFI remote control function

Product Name	Three Units CO2 Shaking Icubator
Model	MQDS-B3cell
Shaking Speed Range	10-300rpm
Shaking ControlAccuracy	±1rpm
Orbit (diameter)	Ф50mm
Temp. Range	4～60℃（Low temperature type，Blew ambient temperature 15℃）
Temp. Control Accuracy	±0.1℃
Temp. Control Uniformity	±0.5℃（at37℃）
CO2 Sensor	Infrared Ray
CO2 Control Range	0-20%
CO2 Control Temp. Range	4～60℃
CO2 Uniformity	±0.4% （at 5% ）
CO2 Control Accuracy	0.001
Display	LCD（Touch Screen）
Air circulation	Forced air circulation
Parameter Control	PLC Microprocessor
Max. Capacity	（1 unit） 250ml×60或500ml×40或1000ml×24或2000ml×15 （Sticky Pallet）)
Timer Range	0-999.9 hrs.
Platform Size（L×W）	（1 unit）957mm×535mm
Standard Accessories	Universal Platform（Dedicated Platform Optional）
Power Source	AC220±10%50～60Hz
Weight	697kg