Many laboratories require ultrapure water every day- for HPLC or for other instrumental analyses- but only as small volumes at a time, up to a total of a few liters at the most. However, this is no reason to do without professional,freshly-prepared ultrapure water and buy expensive HPLC water. After all, with the repeated taking of small volumes from an HPLC water container, the quality of the water and the TOC-value no longer fulfill the specifications. The ultrapure water is no longer ultrapure! Always fresh. Always available in the volume required. Always with the required quality.And always for only a few cents per liter!
Many laboratories require ultrapure water every day- for HPLC or for other instrumental analyses- but only as small volumes at a time, up to a total of a few liters at the most. However, this is no reason to do without professional,freshly-prepared ultrapure water and buy expensive HPLC water. After all, with the repeated taking of small volumes from an HPLC water container, the quality of the water and the TOC-value no longer fulfill the specifications. The ultrapure water is no longer ultrapure! Always fresh. Always available in the volume required. Always with the required quality.And always for only a few cents per liter!
SMART MINI system | SMART MINI |
Pretreatment module | ○ |
High pressure pump | ○ |
Reverse osmosis | ○ |
Dual wavelength UV-lamp | ○ |
Ultra-purification cartridge | ○ |
Microfiltration cartridge | ○ |
Point-of-use filter | ○ |


Model | Smart Mini |
Feed Water Requirement | |
Source | Tap water |
Conductivity* | <2000us/cm |
Hardness** | <450ppm as CaCO3 |
Pressure | 0.05~0.5MPa(7-72psi) |
Temperature | 5~40℃ |
Purification Water(Class III) | |
Ionic Rejection | >95% |
Bacteria Rejection | >99% |
Conductivity | 1~20us/cm(RO-2 5us/cm) |
Productivity Rate | 30L/h |
Ultrapurification Water(Class I) | |
Resistivity At 25℃ | 18.2MΩ.cm |
Conductivity At 25℃ | 0.055us/cm |
TOC Level*** | 1~5ppb |
Endotoxin(Pyrogens)**** | N/A |
Particulate(≥0.02um) | <1pc/ml |
Bacteria*** | <0.1cfu/ml |
Rnase / Dnase** | N/A |
Manual dispense flow rate | 0.5L/min |
Automatic dispense volume | 100~60000ml |
Electrical Requirements | |
Electrical Voltage | 110V/220V±10% |
Electrical Frequency | 50HZ/60HZ |
Packing Information | |
Net Weight | |
Main units | 32kg |
Water tank (30L) | N/A |
External Dimensions(W×D×H) | |
Main units | 315×525×570mm |
Water tank (30L) | N/A |
Shipping weight | |
Main units | 45kg |
Water tank (30L) | N/A |
Shipping Dimensions(W×D×H) | |
Main units | 525×610×770mm |
Water tank (30L) | N/A |
*If feed water quality is poor(Conductivity>1000us/cm), strengthened pretreatment module and RO-2 type is highly recommended
** When hardness of feed water is high(>450ppm as CaCO3), 0.5T water soften is recommended
*** Dual wave UV module need to be adopted. Also dependent on feed water, recommended feed TOC<30ppb

Copy product links
Long by picture save/share
enquiry form:
Inquiry Content:
You have no items to require

enquiry form:
Inquiry Content:
You have no items to require
